Jiangsu Jiacheng Technology Co., Ltd.

Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]

coiler
Specification: KJ500/630
Detail: Main technical data of the coiler: (1) Machine model: WF650/800 (2) line speed (MPM):1800m/min (3) wire diameter(mm):1.0-3.2 (4) Coil diameter: 650/800mm (5) Coil weight: MAX. 1500kg (6) Air pressure: (>***): 0.4-0.6 (...

cable stranding machine
Specification: KJ500/630
Detail: Application: Suitable for stranding long length and big section bare copper,aluminium,aluminium alloy,aluminium cable steel reinforcing wires(ACSR) to produce power cables, sector shaped conductor;round co***cted and single c...

rigid frame stranding machine
Specification: KJ500/630
Detail: Application: Suitable for stranding long length and big section bare copper,aluminium,aluminium alloy,aluminium cable steel reinforcing wires(ACSR) to produce power cables, sector shaped conductor;round co***cted and single c...

copper electroplating machine
Specification: JCJX-3000A/5000A/8000A
Detail: Application: It can make CCSW,CCAW and Cu-Cu wire. Feature: 1.Double floor water tank,save ***ce. 2.Six rollers,the whole rack made of stainless steel. 3.Main motor by frequency control. 4.Take-up part controlled by to...

copper coating machine
Specification: JCJX-3000A/5000A/8000A
Detail: Application: It can make CCSW,CCAW and Cu-Cu wire. Feature: 1.Double floor water tank,save ***ce. 2.Six rollers,the whole rack made of stainless steel. 3.Main motor by frequency control. 4.Take-up part controlled by to...

continuous annealing tin-coating machine
Specification: JCJX-40H
Detail: Application: It can produce two kinds of tin-coating copper wires at the same time. Feature: 1.Dual tinning tanks design; 2.Add one room inside the annealer,can make the temperature i***rtial distribution and low wastage...

aluminium rod breakdown machine
Specification: LHD-450/13
Detail: LHD450/13 Aluminium Rod Breakdown Machine 1.The application of LHD450/13 Aluminium Rod Breakdown Machine: It can used for drawing electrical Aluminium rod from 9.50mm to 1.70-4.80mm,which wound by the auto dual bobbin take-u...

aluminium or aluminium alloy rod breakdown machine
Specification: LHD-450/13
Detail: LHD450/13 Aluminium or Aluminium Alloy Rod Breakdown Machine 1.The application of LHD450/13 Aluminium or Aluminium Alloy Rod Breakdown Machine: It can used for drawing electrical Aluminium (or Aluminium Alloy) rod from 9.50m...

wire drawing machine with annealer
Specification: LHT-450/13
Detail: LHT450/13 Wire Drawing Machine with Annealer 1.The application of LHT450/13 Wire Drawing Machine with Annealer: It can used for drawing electrical copper rod from 8.00mm to 1.20-4.00mm,which wound by the auto dual bobbin tak...

copper wire drawing machine with annealer
Specification: LHT-450/13
Detail: LHT450/13 High Speed Copper Wire Drawing Machine with Annealer 1.The application of LHT450/13 High Speed Copper Wire Drawing Machine with Annealer: It can used for drawing electrical copper rod from 8.00mm to 1.20-4.00mm,whi...


Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2